Home / Blockout Fabric Banners
Blockout Fabric Banners
Product details
Create a clean backdrop without distracting light showing through. This three-layer polyester fabric combines a soft, low-glare surface with an opaque center, keeping your printed design easy to see in bright rooms. Choose the exact dimensions and finishing you need for event graphics, retail displays or photography backdrops.
Specifications
- Material: 9.5 oz three-ply polyester with white outer faces and an internal blockout layer. Dye-sublimated printing on one side.
- Size: Custom dimensions up to 96 x 1800 inches, in either orientation. Pocket configurations require at least 8 inches on each side in the online configurator.
- Finishing: Hemmed edges or heat-cut edges without hems. Brass grommets on all or selected edges, corners, custom spacing, or none. Hems use black or white thread to suit the artwork.
- Pole pockets: 2-inch or 3-inch pockets at the top or top and bottom; custom 1.5-, 2-, 2.5- or 3-inch pockets can be selected per edge. A 2-inch pocket fits a pole up to 1 inch in diameter; a 3-inch pocket fits one up to 1.5 inches. Poles are not included.
- Velcro: Optional 1-inch or 2-inch Velcro on all sides. The loop side is sewn to the banner and the matching adhesive-backed hook strip is included. Pockets and Velcro require hems.
- Artwork: Single-page PDF or JPEG at finished size, CMYK, 150 PPI, fonts outlined. No additional bleed or crop marks. Keep text clear of pocket seams, shown on the exact-size template. Remove guides before uploading.
- Care: Cold water, gentle wash; lay flat or hang to dry. Use a hand steamer for creases. Do not bleach, tumble dry or iron.
- Production: Standard next-business-day supplier production after approval; larger runs may take longer. Transit is additional.
- Included: Printed fabric and selected finishing. Display poles and mounting hardware in the photo are not included.